Toner Cable RX8200 Advanced Modular Receiver - Manual (Page 4)

4:2:2 Decode Options
MPEG-2 4:2:2 Decoding Hardware
(RX8200/HWO/MP2/422, FAZ 101 0113/15)
• Dormant hardware for MPEG-2 4:2:2 decoding
• Enable MPEG-2 4:2:2 decoding with additional options
MPEG-2 SD 4:2:2 Decoding
(RX8200/SWO/MP2/422/SD, FAZ 101 0113/59)
• Enables MPEG-2 SD 4:2:2 decoding
• Requires MPEG-2 4:2:2 only hardware or MPEG-2 & 4 4:2:2
hardware (RX8200/BAS/2, FAZ 101 0113/2)
MPEG-2 HD 4:2:2 Decoding
(RX8200/SWO/MP2/HD/422, FAZ 101 0113/39)
• Enables MPEG-2 HD 4:2:2 decoding
• Requires MPEG-2 SD 4:2:2 decoding option
MPEG-2 and MPEG-4 AVC SD 4:2:2 Decoding
(RX8200/SWO/MP4/422/SD, FAZ 101 0113/43)
• Enables MPEG-4 AVC SD 4:2:2 decoding
• Enables MPEG-2 SD 4:2:2 decoding
• Requires RX8200/BAS/2, FAZ 101 0113/2 unit
MPEG-2 and MPEG-4 AVC HD 4:2:2 Decoding
(RX8200/SWO/MP4/422/HD, FAZ 101 0113/42)
• Enables MPEG-4 AVC HD 4:2:2 decoding
• Enables MPEG-2 HD 4:2:2 decoding
• Requires MPEG-2 and MPEG-4 AVC SD 4:2:2 option
MPEG-4 AVC HD 4:2:2 1080p 50/60 Decoding
(RX8200/SWO/HDSDI/3G, FAZ 101 0113/34)*
• Enables MPEG-4 AVC HD 4:2:2 1080p50/60 decoding
• Enables 3Gig HD-SDI output
• Requires MPEG-2 and MPEG-4 AVC HD 4:2:2 decoding option
• Requires 3Gig HD-SDI output card option
VIDEO PROCESSING OPTIONS
The RX8200 offers a wide range of video processing options to
allow the decoded video to easily interface to HD and SD infra-
structures.
High Quality Down-conversion
(RX8200/HWO/HQDCONV, FAZ 101 0113/60)
• Grade 1 quality Down-conversion of HD to SD
• Provides broadcast quality down-conversion allowing one HD
transmission to address both HD and SD distribution needs
• Simultaneous presentation of HD and SD on video output
interfaces
Down-conversion (RX8200/SWO/DCONV, FAZ 101 0113/26)
• Grade 2 quality Down-conversion of HD to SD
• Simultaneous presentation of HD and SD on video output
interfaces
Up-conversion (RX8200/SWO/UPCONV, FAZ 101 0113/54)
• Up-conversion of SD to HD resolution (4:2:0 modes only)
• Non-simultaneous up-conversion to 720p or 1080i resolution
Cross-conversion (RX8200/SWO/XCONV, FAZ 101 0113/55)
• Conversion of HD video from 720p to 1080i or from 1080i to
720p
Low Latency Decode (RX8200/SWO/LDELAY, FAZ 101 0113/38)
• Low latency video decode (4:2:0 and 4:2:2 modes)
• Compatible with MPEG-1 Layer-II, Dolby® Digital or AAC audio
options
Frame Sync Input (RX8200/SWO/FSYNC, FAZ 101 0113/33)
• Synchronizes the IRD to the house black and burst reference
• Frame Sync functionality often partners 4:2:2 decoding
DATA AND CONTROL OPTIONS
The RX8200 Advanced Modular Receiver can be further enhanced
by a range of data pass-through and remote control capabilities.
RS232 Remote Control and Data
(RX8200/HWO/RS232, FAZ 101 0113/17)
• RS232 remote control* - Alteia protocol
• RS232 data output
High speed IP data output
(RX8200/SWO/IP/DATA, FAZ 101 0113/35)
• MPE based data de-encapsulation of IP data
• Requires IP TS output option (RX8200/HWO/IP/OUT, FAZ 101
0113/14)
AUDIO OPTIONS
The RX8200 Advanced Modular Receiver provides many different
audio capabilities to allow optimal connectivity for many wide-rang-
ing and varied applications.
Capability for MPEG-1 Layer II audio is provided with any video
decode license. Decoded audio will be embedded in (HD)SDI out-
puts and output via physical audio interfaces if ordered.
Balanced Audio Output
(RX8200/HWO/BAL/AUD, FAZ 101 0113/3)
• 2x stereo pairs of balanced analog and digital outputs
• Order QTY two for 4x stereo pair capability
Unbalanced Audio Output
(RX8200/HWO/UNBAL/AUD, FAZ 101 0113/19)*
• 2x stereo pairs of unbalanced digital outputs
• Order QTY two for 4x stereo pair capability
Dolby® Digital Decode (RX8200/SWO/AC3, FAZ 101 0113/22)
• Enables decoding or pass-through of Dolby Digital Audio
• 2x 5.1 decode and down-mix to 2.0 (stereo)
• 1x full 5.1 decode
• 2x 2.0/5.1 pass-through -compressed and embedded in (HD)SDI
AAC Audio decode (RX8200/SWO/AAC, FAZ 101 0113/21)
• 2x AAC-LC and HE-AAC decoding
Phase Aligned Audio (RX8200/SWO/PAA, FAZ 101 0113/49)
• Phase aligned MPEG-1 Layer II audio - 4x stereo pairs
• Requires 4x Audio license (RX8200/SWO/4AUD, FAZ 101
0113/20)
4x Audio Capability (RX8200/SWO/4AUD, FAZ 101 0113/20)
• Enables up to six decodes
• Enables pass-through of audio services three and four
• Compatible with MPEG-1 Layer II, Dolby Digital, AAC, Dolby®E
and linear audio
• Embeds up to six channels of audio into the (HD) SDI video
output
• Requires QTY two audio output cards if four stereo pairs of
physical audio interfaces are desired
XLR Terminal Audio Break-Out Cable
(RX8XXX/CABLE/XLR , FAZ 101 0108/24)
• Provides XLR terminal connections for analogue and digital
audio output
• 1x stereo pair per breakout cable via 2x XLR connectors
Screw Terminal Audio Break-Out Cable
(RX8XXX/CABLE/SCRTRM, FAZ 101 0108/23)
• Provides screw terminal connections for analog and digital audio
output
• 1x stereo pair per breakout cable via 2x Screw terminal
connectors