GLOBALSAT TR-203A - Manual (Page 88)

87
Commands Codeword Parameters
N8 Enable Data logger
Under standby mode to store position according to data logger
distance
If you want TR-203 to store position according to traveled
distance, you have to extra make GPS on. Please refer to
“Chapter 4 GPS.”
The following parameters must be set for configuration or
sending those parameters by other action command:
Code word Parameters Value Description
OH
Data logger
distance
u32, in meters
0 ~ 4Giga
0=disable
Command’s format for enable data logger:
GS C ,IMEI,N8(OH)*Checksum!
Commands Codeword Parameters
N8 Enable Data logger
n
Under tracking report state
o
When device received “N8” command and then enable data logger function.
p
Store position in accordance with data logger distance.
Standby mode
O2 (Data logger distance) (Store position to buffer storage)
n
o
p
Distan ce