GLOBALSAT TR-203A - Manual (Page 87)

86
Command’s format for enable data logger:
GS C ,IMEI,N8(O2)*Checksum!
Commands Codeword Parameters
N8 Enable Data logger
Under standby mode to store position according to data logger
interval
The following parameters must be set for configuration or
sending those parameters by other action command:
Code word Parameters Value Description
O2
Data logger
interval
u16, in seconds
0 ~ 65535
0=disable
Command’s format for enable data logger:
GS C ,IMEI,N8(O2)*Checksum!
n
Under tracking report state
o
When device received “N8” command and then enable data logger function.
p
Store position in accordance with data logger interval.
Standby mode
O2 (Data logger interval) (Store position to buffer storage)
n
o
p
Time