GLOBALSAT TR-203A User Manual
Page 53
52
The parameter of parking mode:
Code
word
Parameters
Value
Description
T0
Report interval in alert
state
1~4Giga seconds
T1
Report interval in alarm
state
1~4Giga seconds
T2
Report Media
Please refer to 2.9
Report media
T3
Traveled distance for
sending report
0=disable
1~4Giga
Unit: meter
If you want TR-203 to
send reports
according to traveled
distance, you have to
extra make GPS on.
Please refer to
“Chapter 4 GPS.”
Commands format:
GS
C
,IMEI,M6*Checksum!
Commands Codeword
Parameters
M6
Set parking mode
Nb
Dismiss parking alarm
Example 1:
Set TR-203 parking mode with report interval of 3600 seconds
Note of Traveled Distance:
You can also set a traveled distance, and then TR-203 will report by the
combination of report interval and traveled distance.
For example, the report interval is 60 seconds, the traveled distance is 800
meters, TR-203 sends 1 report at 10:00:00, and then it detects the traveled
distance is over 800 meters at 10:00:50, it will send out one report and
re-start to count the report interval and the traveled distance. The next report
will be sent out at 10:01:50 or when the traveled distance is over 800 meters.