GLOBALSAT TR-203A - Manual (Page 83)

82
11 Report Messages
There are two types of message’s report format, “format 0” and “format 1”.
Defined as follows:
11.1 Format 0 of Report Messages
Command’s format for set format 0 of report messages:
GS S ,IMEI,T,S,O3=y1y2y3….yn,*Checksum!
y1,y2,y3… are their respective parameters of report messages.
(Refer to “2.6. Parameters of Report Messages” for details of
parameters’ definition)
Parameter’s Codeword Description
O3 Report format 0
Example 1:
Set TR-203 format of report messages for format 0 (Send
command via SMS or TCP or UDP)
GSS,135785412249986,3,0,O3=SORPZAB72GHLMN*U!*6b!
(Refer to “2.6. Parameters of Report Messages” for details of
parameters’ definition)
Report format for format 0 of report messages (report
messages via SMS or TCP or UDP)
GS r ,IMEI,Device_Mode,Report_Type,Alarm_Status,Geofence_st