GLOBALSAT TR-203A User Manual
Page 73
72
Commands Codeword
Parameters
L3
Read Geo-fence
Example 1:
Ask TR-203 report the parameters of 1
st
~10
th
Geo-fence area
The method of marking 1
st
~10
th
geo-fence areas is to write 1~10
in the braces after L3, like L3 (1-10)
GSC,132763902812736,L3(1-10)*04!
Report format for read Geo-fence:
GS
g
,IMEI,T,S,1=(type,upper_left_Lon,upper_left_Lat,righ
t_bottom_Lon,right_bottom_Lat[,gxxx][,StartTime,EndTi
me,weekday]),2=(…),3=(…),…*Checksum!
About the parameters of reading geo-fence, please refer to the
parameters of setting geo-fence.
Example 1:
Report 1~10 coordinates of Geo-fence
GSg,132763902812736,1,0,1=(1,121305521,24999088,121308246
,24997649,g2,00,86400,7F),2=(1,121302452,25004397,121305285
,25002842,g2,00,86400,7F)*6D!
GSg,132763902812736,0,1,3=(1,121299427,25014101,121302345
,25012545,g2,00,86400,7F),4=(1,121301723,25022909,121305306
,25021101,g2,00,86400, 7F)*4F!
GSg,132763902812736,0,2,5=(1,12146435,25009979,121466711,2
5008423,g2,00,86400,02),6=(1,121471624,25012487,121474736,2
5010756,g2,00,86400,02)*54!
GSg,132763902812736,0,3,7=(1,121479371,25016629,12148068,
25015657,g2,00,86400,02),8=(1,121547295,25043931,121548105,