GLOBALSAT TR-203A - Manual (Page 62)

61
Example 1:
Stop sleeping mode and then enter standby mode (Send
command via SMS or TCP or UDP)
GSC,10339376540375,M7*27!
Example 2:
Stop sleeping mode and then enter periodic mode (Send
command via SMS or TCP or UDP)
GSC,10339376540375,M2*22!
Commands Codeword Parameters
M2 Set periodic mode
n
Sleeping alert report.
o
When TR-203 detects motion, it will enter sleeping alarm mode and
send alarm report.
p
Under sleeping alarm state, when received other tracking or standby
commands, the device will enter to the other tracking or standby mode.
q
Other tracking mode or standby mode.