GLOBALSAT TR-203A - Manual (Page 14)

13
to report “cell ID” if it
does not get GPS fix
The report format will
automatically switch from format
0 to format 2 when TR-203 does
not get GPS fix.
OO
Report media for
reading configuration
Media type
bit1=TCP
bit2=UDP
bit6=Action[0]
bit7=Action[1]
Action=00: report format 0
Action=01: report format 1
Action=10: GPS on
Action=11:
C0 GPS always on 1/0
0=disable
1=enable
Applicable to all modes except
Sleeping and Off mode
C1
The time for starting to
get GPS fix before the
next report time if
TR-203 does not get
GPS fix in last report,
or got GPS fix for 1
hour ago
u16, in
seconds
60 ~ 600
Note: TR-203 will send out the
report whether it gets GPS fix or
not when C1 time ends.
C2
The time for starting to
get GPS fix before the
next report time if
TR-203 got GPS fix
within 1 hour
u16, in
seconds
10 ~ 120
Note: TR-203 will send out the
report whether it gets GPS fix or
not when C2 time ends.
C3
GPS fix time before
sending out the first
report
u16, in
seconds
0 ~ 600
If "C3"=0, disable first report
message.
C7
Choose to use C8 or
C9+CA
1/0
0=use C8
1=use C9+CA
Applicable for standby, periodic
and on-line mode
GPS GPS
C8
Interval for starting to
get GPS fix
u16, in
seconds
0 ~ 65535
Applicable if C7=0