GLOBALSAT TR-203A - Manual (Page 25)

24
2.8 Command’s Codeword
Command’s Codeword
Codeword Parameters Description
M7 Set Standby Mode
M2 Set Periodic Mode
M3 Set On-Line mode
M4 Set Motion mode
M6 Set Parking mode
M1 Set Sleeping mode
M8 Set Off mode
N0 Set Timer
N1 Ping device
N4 Enable Voice Monitor
N6 Enable Geo-fence
N7 Disable Geo-fence
N8 Enable Data logger
N9 Disable Data logger
Na Dismiss SOS alarm
Nb Dismiss parking alarm
Nc Dismiss sleeping alarm
Ne Dismiss Geo-fence alarm
Nh Dismiss low battery alarm
Ni Dismiss All alarm
L1 Read Configuration
Adding up to 1-5 parameters.
If parameter=(ALL), then all user
configuration data will be reported.
L3 Read Geo-fence
L4
Make TR-203 connect to
Server
L5 Disconnect from Server
LA Restore default configuration
Restore all parameters to factory
value