Velleman CTC1000 - Manual (Page 22)

CTC1000
V. 01 – 12/06/2013 22 ©Velleman nv
Mode System status Device behaviour
Home Access when the system is in away arm mode if a home access door contact is triggered, a
burglar alarm will be activated immediately
when the system is in home arm mode if a home access door contact is triggered, the
control panel will start an entry delay period to
give enough time to disarm the system
during the entry delay or exit delay
period if a home access door contact is triggered, the
control panel will not respond
Delay when the system is in away arm / home
arm mode if a delay door contact is triggered, a burglar
alarm will be activated immediately
during the entry delay or exit delay
period if a delay zone door contact is triggered, the
control panel will not respond
Entry when the system is in away arm / home
arm mode if an entry door contact is triggered, the
control panel will start an entry period to give
enough time to disarm the system
after the delay period is expired and no
correct pin code is entered to disarm the
system the control panel will respond with a burglar
alarm after 30 seconds
when the system is in alarm off mode if an entry door contact is triggered, the
control panel will sound a door chime (if
programmed).
Away Entry when the system is in away arm mode if an away entry door contact is triggered, the
control panel will start an entry period to give
enough time to disarm the system
after the delay period is expired and no
correct pin code is entered to disarm the
system the control panel will respond with a burglar
alarm after 30 seconds
when the system is in alarm off mode if an entry door contact is triggered, the
control panel will sound a door chime (if
programmed).
when the system is in home arm mode if an away entry door contact is triggered, the
control panel will not respond
during the entry delay or exit delay
period if an away entry door contact is triggered, the
control panel will not respond
24 Hour Not applicable the 24 hour door contact is active all the time
and does not have to be armed or disarmed
Fire Not applicable the fire door contact is active all the time and
does not have to be armed or disarmed
Medical Emg Not applicable a medical emg door contact is active all the
time and does not have to be armed or
disarmed
Water Not applicable the water door contact is active all the time
and does not have to be armed or disarmed
9.4 Edit a device
The function varies depending on the type of device you want to edit.
Edit a door contact – PIR sensor - remote control

Enter Program mode, go to Devices+/-, select Edit devices and press OK.
The display lists all the devices available.