8 notify, Push video, Push message – Velleman NVR2 User Manual

Page 40

MAIN MENU

6.4.8 NOTIFY

You can configure this NVR to send notifications for certain events to mobile devices with our mobile app,
EagleEyes, installed, or to the specified E-mail address(es).

PUSH VIDEO

(for selected models only)

Before using this function, make sure:



The camera connected to this NVR is our ETS network camera series.



You have iPhone, iPad, or Android mobile phone or tablet.



You have subscribed the mobile network service from your mobile service provider.



The mobile app, EagleEyes, is installed in your mobile device. For details, please refer to “APPENDIX 1 MOBILE

SURVEILLANCE VIA EAGLEEYES” at page 38.



You have configured EagleEyes to access this NVR, and Push Video is enabled. For details, please refer to “APPENDIX 1

MOBILE SURVEILLANCE VIA EAGLEEYES” at page 38.

You’ll get an active event notification with video telling you the occurrence of alarm event(s).

ADVANCED CONFIG

CONNECTION

PUSH VIDEO PUSH MESSAGE MESSAGE MAIL

VIDEO MAIL

CAMERA

GUARD ON

DETECTION CH01

ALARM N.C.

CH1 alarm

ALERT

CH02 ALARM

N.O.

CH2

NETWORK

CH03 ALARM

OFF

CH3

DISPLAY

CH04 ALARM

OFF

CH4

RECORD

CH05 ALARM

OFF

CH5

NOTIFY

CH06 ALARM

OFF

CH6

EXIT

Step1: Switch “GUARD” to “ON”.

Step2: Select the channel number with our ETS network camera connected, and select the alarm type to

“ALARM N.C.” or “ALARM N.O.”

Step3:Customize the notification message you want to see after alarm type setting, or keep the default message,

which shows only the channel numbering.

Step4: Enable “Push Video” in EagleEyes on your mobile device, and try to trigger an alarm event to see if you’ll

get

Push Video.

PUSH MESSAGE