Velleman NVR2 - Manual (Page 38)

MAIN MENU
32
6.4.6 DISPLAY
ADVANCED CONFIG
CONNECTION FULL SCREEN DURATION 03
CAMERA DISPLAY COVERT ON
DETECTION HDD DISPLAY MODE SIZE
ALERT BRIGHTNESS 128
NETWORK CONTRAST 128
DISPLAY SATURATION 128
RECORD
NOTIFY
EXIT
1) FULL SCREEN DURATION
Select the full screen dwell duration time in second (03 / 05 / 10 / 15).
2) DISPLAY COVERT
Select “ON” or “OFF” to display or hide the wording “COV.” when covert recording is activated in “CAMERA”.
3) HDD DISPLAY MODE
Select “SIZE” to show the remaining hard disk capacity for recording in GB, or “TIME” to show the remaining
recording time.
4) BRIGHTNESS / CONTRAST / SATURATION
Click the current value to manually adjust the brightness/contrast/saturation/ of the screen.
6.4.7 RECORD
Note: Please DO NOT change the date or time of your NVR after the recording function is activated.
Otherwise, the recorded data will be disordered and you will not be able to find the recorded file
to backup by time search. If users change the date or time accidentally when the recording
function is activated, it’s recommended to clear all hard disk data, and start recording again.
ADVANCED CONFIG
CONNECTION MANUAL RECORD OFF
CAMERA EVENT RECORD ON
DETECTION TIMER RECORD OFF
ALERT PRE-ALARM RECORD ON
NETWORK OVERWRITE ON
DISPLAY KEEP DATA LIMIT (DAYS) OFF
RECORD RECORD CONFIG SETUP
NOTIFY NVR MODE 6CH
EXIT
1) MANUAL RECORD
Set the manual recording function on / off.
2) EVENT RECORD
Set the event recording function on / off.
3) TIMER RECORD
Set the timer recording function on / off.