3 ip device search – Velleman NVR2 User Manual
Page 17
FREQUENTLY-USED FUNCTIONS
11
4.3 IP Device Search
Note: This function is available only for “SUPERVISOR”. To know more details, please refer to “4.4 User
Level Creation” at page 12.
Click
(IP Search) to start searching IP camera(s) connected in the same network segment as the NVR (i.e.
10.1.1.xx by default).
You’ll see the list of every connected IP camera with its connection status to this NVR and MAC address.
IP SEARCH
IP PORT
MAC
PROTOCOL
STATUS
10.1.1.12
88
00:0e:53:e5:9a:f1
AVTECH
CONNECTED TO CH1
10.1.1.13
88
00:0e:53:a6:91:18
AVTECH
CONNECTED TO CH2
10.1.1.14
88
00:0e:53:a5:9f:a2
AVTECH
UNUSED
10.1.1.15
88
00:0e:53:e1:4e:k5
ONVIF
CONNECTED TO CH3
10.1.1.16
88
00:0e:53:s5:3e:h6
ONVIF
CONNECTED TO CH4
10.1.1.17
88
00:0e:53:e6:4b:26
ONVIF
CONNECTED TO CH5
10.1.1.18
88
00:0e:53:g2:3b:e7 AVTECH
CONNECTED TO CH6
CONNECT
SETUP EXIT
To fix the camera IP address, or allow the NVR to assign an IP address to your IP camera, select “SETUP”, and
select “STATIC IP “ or “DHCP” for “NETWORK TYPE”.
Click “APPLY” and “EXIT” to save your changes.
SETUP
NETWORK TYPE
DHCP
IP 10.1.1.14
PORT
80
USER NAME
admin
PASSWORD
*****
NETMASK
255.0.0.0
GATEWAY
10.1.1.10
PRIMARY DNS
168.95.1.1
APPLY EXIT
To connect to another IP camera, select the unused IP camera from the IP search list, and select “CONNECT”.
Select the channel you want to display the camera images, and click “SAVE” to start connection.
CONNECT
IP 10.1.1.14
PORT
88
CHANNEL
CH5
USER NAME
admin
PASSWORD
*****
SAVE
CANCEL