Milton CAT 420E IT - Manual (Page 20)

20
420E/420E IT Specifications
Dimensions with Forks/Material Handling Arm
Fork Tine Length 1070 mm/3 ft 6 in 1220 mm/4 ft 0 in 1370 mm/4 ft 10 in
Operating load (SAE J1197) 2291 kg* 5,051 lb* 2215 kg* 4,883 lb* 2019 kg 4,451 lb
SAE load center 535 mm 1 ft 9 in 610 mm 2 ft 0 in 685 mm 2 ft 3 in
Operating load (CEN 474-4) 2428 kg 5,353 lb 2406 kg 5,304 lb 2382 kg 5,251 lb
CEN load center 500 mm 1 ft 8 in 500 mm 1 ft 8 in 500 mm 1 ft 8 in
(1) Overall length (forks on ground) 7717 mm 25 ft 4 in 7867 mm 25 ft 10 in 8017 mm 26 ft 4 in
(2) Reach at ground (from grill to heel of fork) † 985 mm 3 ft 3 in 985 mm 3 ft 3 in 985 mm 3 ft 2 in
(3) Maximum reach (from grill to heel of fork) † 1427 mm 4 ft 8 in 1427 mm 4 ft 8 in 1427 mm 4 ft 8 in
(4) Fork height at maximum reach 1458 mm 4 ft 9 in 1458 mm 4 ft 9 in 1458 mm 4 ft 9 in
(5) Reach at maximum height (from grill to heel of fork) † 665 mm 2 ft 2 in 665 mm 2 ft 2 in 665 mm 2 ft 2 in
(6) Maximum fork height 3238 mm 10 ft 7 in 3238 mm 10 ft 7 in 3238 mm 10 ft 7 in
(7) Maximum fork depth (below ground level) 20 mm 1 in 20 mm 1 in 20 mm 1 in
* Tip limited.
†
Measured from nose of machine.
Dimensions and performance specifi cations shown are for machines equipped with 12.5/80-18 SGL front tires, 19.5L-24 IT525 rear tires, ROPS canopy, standard stick with
610 mm (24 inch) standard duty bucket, and 0.96 m³ (1.25 yd³) loader bucket and standard equipment unless otherwise specified.
1
2
3
5
4
6
7