Milton CAT 420E IT - Manual (Page 14)

14
420E/420E IT Specifications
Machine Dimensions
Single Tilt Loader
General Purpose
(0.96 m³/1.25 yd³) (1.00 m³/1.31 yd³) (1.07 m³/1.40 yd³) (1.15 m³/1.50 yd³)
General Purpose General Purpose General Purpose
mm ft/in mm ft/in mm ft/in mm ft/in
(1) Overall length (loader on ground) 7290 23 ft 11 in 7245 23 ft 9 in 7307 24 ft 0 in 7232 23 ft 9 in
Overall transport length 7343 24 ft 1 in 7311 24 ft 0 in 7378 24 ft 2 in 7227 23 ft 9 in
(2) Overall transport height (standard stick) 3577 11 ft 9 in 3577 11 ft 9 in 3577 11 ft 9 in 3577 11 ft 9 in
Overall transport height (extendible stick) 3631 11 ft 11 in 3631 11 ft 11 in 3631 11 ft 11 in 3631 11 ft 11 in
Overall Width 2438 8 ft 0 in 2438 8 ft 0 in 2438 8 ft 0 in 2322 7 ft 7 in
(3) Height to top of cab/canopy 2819 9 ft 3 in 2819 9 ft 3 in 2819 9 ft 3 in 2819 9 ft 3 in
(4) Height to top of exhaust stack 2754 9 ft 0 in 2754 9 ft 0 in 2754 9 ft 0 in 2754 9 ft 0 in
Height to loader hinge pin (transport) 365 1 ft 2 in 365 1 ft 2 in 407 1 ft 4 in 405 1 ft 4 in
Ground clearance (minimum) 320 1 ft 1 in 320 1 ft 1 in 320 1 ft 1 in 320 1 ft 1 in
(5) Rear axle centerline to front grill 2704 8 ft 10 in 2704 8 ft 10 in 2704 8 ft 10 in 2705 8 ft 10 in
Front wheel tread gauge 1880 6 ft 2 in 1880 6 ft 2 in 1880 6 ft 2 in 1826 6 ft 0 in
Rear wheel tread gauge 1727 5 ft 8 in 1727 5 ft 8 in 1727 5 ft 8 in 1707 5 ft 7 in
(6) Wheelbase 2WD/4WD 2200 7 ft 3 in 2200 7 ft 3 in 2200 7 ft 3 in 2200 7 ft 3 in
D
610 mm (24 inch) standard duty bucket, and 0.96 m³ (1.25 yd³) loader bucket and standard equipment unless otherwise specified.
imensions and performance specifi cations shown are for machines equipped with 12.5/80-18 SGL front tires, 19.5L-24 IT525 rear tires, ROPS canopy, standard stick with
Single Tilt Loader
IT Loader