Milton CAT 420E IT - Manual (Page 16)

16
420E/420E IT Specifications
Machine Dimensions
IT Loader with Quick Coupler
Multi Purpose Multi Purpose
mm ft/in mm ft/in
(1) Overall length (loader on ground) 7231 23 ft 9 in 7231 23 ft 9 in
Overall transport length 7208 23 ft 8 in 7208 23 ft 8 in
(2) Overall transport height (standard stick) 3577 11 ft 9 in 3577 11 ft 9 in
Overall transport height (extendible stick) 3631 11 ft 11 in 3631 11 ft 11 in
Overall Width 2322 7 ft 7 in 2322 7 ft 7 in
(3) Height to top of cab/canopy 2819 9 ft 3 in 2819 9 ft 3 in
(4) Height to top of exhaust stack 2754 9 ft 0 in 2754 9 ft 0 in
Height to loader hinge pin (transport) 359 1 ft 2 in 359 1 ft 2 in
Ground clearance (minimum) 320 1 ft 1 in 320 1 ft 1 in
(5) Rear axle centerline to front grill 2705 8 ft 10 in 2705 8 ft 10 in
Front wheel tread gauge 1826 6 ft 0 in 1826 6 ft 0 in
Rear wheel tread gauge 1707 5 ft 7 in 1707 5 ft 7 in
(6) Wheelbase 2WD/4WD 2200 7 ft 3 in 2200 7 ft 3 in
Dimensions and performance specifi cations shown are for machines equipped with 12.5/80-18 SGL front tires, 19.5L-24 IT525 rear tires, ROPS canopy, standard stick with
Single Tilt Loader
IT Loader
(0.96 m³/1.25 yd³) (1.03 m³/1.35 yd³)
610 mm (24 inch) standard duty bucket, and 0.96 m³ (1.25 yd³) loader bucket and standard equipment unless otherwise specified.