Atdec Visidec VF-AT-D Technical specs - Manual

A General Features
Technical Specifications
Maximum Load:
8kg (17.5lbs) per display.
Display Compatibility:
Visidec Focus Articulated Arm Double is compatible with most
Flat Panel Displays between 12” and 24” (30cm and 61cm)
that feature either 75mm x 75mm
or 100mm x 100mm
VESA mounting hole patterns.
Mounting Options:
Visidec Focus Articulated Arm Double includes Bolt Through
and Desk Clamp mounting options. NOTE: Desk Clamp
mounting option is only suitable for displays in side
by side configuration.
• Bolt Through
Suits desktop thicknesses of 12mm - 40mm (0.5”-1.5”)
• Desk Clamp
Suits desktop thicknesses of 12mm - 38mm (0.5”-1.5”)
6
1
2
4
3
5
B Range of Movement
Included Hardware:
All fasteners and mounting hardware are included.
Tools Required:
Power drill, 9mm (³/
8
”) drill bit, Phillips Head screwdriver.
Cable Management:
Cable management system includes cable slot and cable
management clips.
Colour:
Warranty: 10 years limited
Polished Silver.
IMPORTANT:
Please read the Installation Instructions before
mounting Visidec Focus Articulated Arm Double
1 +/-70° tilt adjustment
2 +/-95° portrait/landscape adjustment
3 180° pan adjustment
4 360° articulation of arms
5 240° rotation at shoulder
6 315mm (12.5”) height adjustment range
NOTE:
The back to back display configuration shown can
only be used in conjunction with the Bolt Through
mounting option.
The range of movement shown here applies to both
arms of Visidec Focus Articulated Arm Double.
vf-at-d / focus articulated arm
double