Atdec Telehook TH-TVCB Installation manual - Manual

Installation Instructions TH-TVCB
Component Checklist
Mobile TV Cart
HARDWARE
Column
Frame
Shelf Mounting Bracket
Shelf Mounting
Screw
M8x16 Screw
(x4)
M8 Screw (x6)
M8 Spring
Washer (x6)
! IMPORTANT - Install Telehook TV Cart as per installation instruction.
! This product supports a maximum load of 50kg (110lbs.).
! This product supports VESA mounting hole configurations: From 200 x 200mm to 800 x 600mm.
! The manufacturer accepts no responsibility for incorrect installation.
IMPORTANT INFORMATION:
Step 1. Check Components
Check you have received against the component checklist and hardware above.
Step 2. Assemble Base Step 3. Fasten Column to Base
M8 Screws
Spring Washer
OR
Tilt Mechanism
Extension Washer (x4)
Extension Bracket (x4)
Caster (x4)
Top Cap (x4) Shelf Mounting Plate
Caster
Supplied
Spanner
Frame
UNLOCKED
LOCKED
Supplied Allen Key
Column
Base
Step 4A. Attach Tilt Mechanism to Display Step 4B. Insert Tilt Mechanism to Column
TOP
Spanner (x2)
Allen Key M8x10 Screw (x8)
M5 Washer (x6)
M8 Washer (x10)
1/4” Washer (x6)
Spacer (x6)
Display Mounting
Screws (x6 each)
M4x16/35mm
M5x16/35mm
M6x16/35mm
M8x16/35mm
Tools Required:
• Phillips head screw driver
Display Mounting
Screw
Washer
Tilt Mechanism
Spacer
(optional, use
only for recessed
mounting holes.)
INSERT
Supplied Allen
Key
For a VESA Hole Configuration of 200x200mm ONLY go to Step 4 and skip Step 5 & 6.
For a VESA Hole Configuration of over 200x200mm skip Step 4 and go to Step 5.