Atdec Telehook TH-2250-VF Installation manual - Manual (Page 2)

Display
Wall Plate Slots
Display Plate Side Flange
Display
M5 Security
Screw
Mounting Screw
Back of Display
Display Plate
Recessed Mounting Holes
If the mounting holes are reccessed into the back of the
display, use the supplied Spacer Bushes to pack the
recessed holes. Ensure that the correct length mounting
screws are used to securely attach the plate to the display.
TOP
Mounting Screw
Back of Display
Display Plate
Spacer Bush
Recessed
Mounting Hole
Step 3. Mounting the Display Plate
With the Display Plate attached
to the Display, lift the Display,
slide into the Wall plate. Ensuring
that the side flanges engage into
wall plate slots.
Step 4. Attaching Display to Wall Plate
To properly secure the display
to the wall it is recommended
to used the four M5 security
screws to securely attach the
two plates together.
Step 5. Security Option
Installation Complete
No portion of this document or any artwork contained herein should be reproduced in anyway without the express written consent Atdec Pty Ltd.
Due to continuing product development, the manufacturer reserves the right to alter specifications without noticed. Published 01.03.10 ©