Atdec Telehook TH-TVCH Installation manual - Manual (Page 3)

Step 7. Attach Fixings to Screen
If dimension Y is from 200mm to 450mm skip Step 8 and go straight to Step 9
If dimension X is 200mm
Insert Socket Head Bolt
straight into the screen
ensuring that there is a
3-5mm gap.
3-5mm
3-5mm
Screen back
M4/5/6/8
Screw
Spacer
M5 or 1/4”
Washer
If dimension X is from
300mm to 450mm
If dimension X is from
450mm to 800mm
If dimension Y is from
450mm to 800mm
mount the Upright
extensions.
Mount the Brackets onto
the back taking note to
leave the bottom bracket
loose so that it can slide.
Mount the Brackets with
extensions onto the back
taking note to leave the
bottom bracket loose
so that it can slide.
M8 Phillips Head Screw
21mm OD M8
Flat Washer
Rectangular Washer
Extension Bracket
Step 8. Mount Upright Extensions
3-5mm
M8 Phillips
Head Screw
NOTE: Key holes
are on top, slots
are at the bottom.
21mm OD
Black Washer
28mm OD Spacer
Extension Bracket