Atdec Telehook TH-TVCH Installation manual - Manual (Page 2)

Step 3. Mount Column to Base
Step 6. Choose Screen Orientation
Step 4. Adjust Height Step 5. Attach Uprights
3.1 Line holes up
and secure column
to base.
3.2 Secure column
from beneath.
M8 Button Head Screws
3/8” Spring Washer
3/8” Washer
93mm OD Washer
3/8” Bolt
Spanner
M8 Spring Washers
Holes
6.1 The TV Cart supports both Landscape and Portrait orientations. The method of attaching
the screen will depend on the screen’s VESA hole configuration.
Before moving to the next step, measure dimensions X & Y as shown below.
4.1 You can adjust the
height by moving the
tubes up or down before
fastening them.
M8 Screws
M8 Curved Washer
Allen Key
Allen Key
Landscape
Portrait
VESA hole configuration
X
X
Y Y
5.1 Remove fasteners and washers from the Column before attaching
Uprights. Secure fasteners loosely to allow for movement.
M8 Curved
Washer
M8 Button
Head Screw