VEGA VEGABAR 61 4 … 20 mA_HART - Manual (Page 6)

2.5 Safety approval markings and safety tips
T he safety approval markings and safety tips on the device must be
observed.
2.6 CE conformity
T his device fulfills the legal requirements of the applicable EC
guidelines. By attaching the CE mark, VEGA provides a confirmation
of successful testing. You can find the CE conformity declaration in the
download area of www.vega.com.
2.7 Fulfillment of NAMUR recommendations
W ith respect to compatibility, the NAMUR recommendation NE 53 is
fulfilled. This applies also to the corresponding indicating and
adjustment components. VEGA instruments are generally upward and
downward compatible.
l S ensor software for DTM VEGABAR 61 HART, PA or FF
l DTM VEGABAR 61 for adjustment software PACTware
l I ndicating and adjustment module for sensor software
T he parameter adjustment of the basic sensor functions is independ-
ent of the software version. The range of available functions depends
on the respective software version of the individual components.
T he software version of VEGABAR 61 can be determined as follows:
l
via PACTware
l
on the type label of the electronics
l
via the indicating and adjustment module
Y ou can view all software histories on our website www.vega.com.
M ake use of this advantage and get registered for update information
via e-mail.
2.8 Safety instructions for Ex areas
P lease note the Ex-specific safety information for installation and
operation in Ex areas. These safety instructions are part of the
operating instructions manual and come with the Ex-approved
instruments.
2.9 Safety instructions for oxygen applications
F or instruments in oxygen applications the special instructions in
chapters "Storage and transport", "Mounting" as well as "Technical
data" under "Process conditions"must be noted. Furthermore the valid
national regulations, implementation instructions and memorandums
of the BG (professional assoc.) must be noted.
6 VEGABAR 61 • 4 … 20 mA/HART
2 F or your safety
27519
-EN
-081209