VEGA VEGAMET 513 - Manual (Page 15)

VEGAMET 513 15
Adjustment
Format examples of the menu schematic
In white letters you see the param-
eters which can be modified with the
[+] or [–] key and saved with the
[OK] key.
Examples:
- In the menu item "Language" you can
change from German to English.
Bold print/italic entries, e.g. the
measurement loop name "TAG-No. 1"
can differ if you have made a
corresponding parameter adjust-
ment or configuration of the measurement
loop. In the menu schematics you will see the
factory settings.
Light grey menu items are only dis-
played if necessary (depending on
the adjustments made in the other
menu items).
Change of the menu mode:
Move from the display of measured value
(TAG-No.1) to the menu item "Menu mode
Reduced". Now push [+] twice until "Menu
mode Extended" appears, then push [OK] to
save the setting. You can now return to the
display of measured value by pushing [ESC]
twice.
Lang-
uage
Eng-
lish
Param.
TAG-
No. 1
▼
Volt
at
0%
0,000
TAG-
No. 1
%
xx,x
Param.
TAG-
No. 1 Confi-
gura-
tion Add’l
func-
tions
Pass-
word
off
Lang-
uage
Eng-
lish
TAG 1
to de
fault Menu
mode
Redu-
ced
Ex-
tended
Reset
TAG 1
4.3 Adjustment via PC
Signal conditioning instrument with ad-
justment module
Setup
- directly via the keys of the adjustment
module
- or with a PC, equipped with VVO software
(VEGA Visual Operating) and an interface
adapter VEGACONNECT.
CONNECT
515
%
100
+ -
OK ESC
on
1 2
VEGACONNECT
PC with VVO software