VTech C3200 Manual - Manual (Page 41)

38
Volume
Listening volume can be adjusted on the cordless handset and the telephone base.
To adjust the listening volume:
During a call on the handset, press +/VOLUME/- on it to adjust the listening volume. The next call returns to the default
listening volume.
During a call on the telephone base, press
+/- VOLUME on it to adjust the listening volume. The next call returns to the default
listening volume.
Ringer volume of the telephone base can be adjusted.
To adjust the ringer volume of the telephone base:
When the telephone base is idle, press
+/- VOLUME on it to adjust the ringer volume.
Call waiting
When you hear a call waiting tone during a call, press FLASH on the cordless handset or the telephone base to put the current
call on hold and take the new incoming call.
Press
FLASH at any time to switch back and forth between calls.
Mute
To mute the microphone:
During a call, press MUTE on the cordless handset or the telephone base. The MUTE key illuminates when the mute function is
turned on. You can hear the party on the other end but they cannot hear you.
Press
MUTE again to resume the conversation. The light on the MUTE key turns off.
Hold
When a call is placed on hold, any parallel phone that tries to use the same phone line will take the call off hold and pick the call.
To place a call on hold on the cordless handset:
During a call, press HOLD on the cordless handset. The TALK key on the cordless handset and the HOLD key on the telephone
base flash when the call is on hold.
Press
TALK or /SPEAKER to release the call from hold, or the call will end automatically after the preset call on hold duration.
To place a call on hold on the telephone base:
During a call, press HOLD on the telephone base. The TALK key on the cordless handset and the HOLD key on the telephone
base flash when the call is on hold.
Press
/SPEAKER to release the call from hold, or the call will end automatically after the preset call on hold duration.
Find handset
Use this feature to find all registered cordless handsets.
To start paging:
Press
/FIND HANDSET on the telephone base when the telephone is not in use. All idle cordless handsets beep for 60 seconds.
To end paging:
Press /FIND HANDSET again on the telephone base.
-OR-
Press any key on the cordless handset to stop the paging tone.
Data port
You can connect your modem or fax machine to the telephone line through the DATA port.
•
•
1.
2.
1.
2.
1.
2.
1.
2.
•
•
Analog cordless 1-line - A1410
Telephone operation