VTech C3200 Manual - Manual (Page 36)

33
Telephone operation
Analog corded 1-line - CL-A1110
Receive a call
The telephone rings and the MESSAGE WAITING LED flashes when there is an incoming call.
To answer a call:
Lift the corded handset from the telephone base.
Place a call
Lift the corded handset. Listen for a dial tone and then dial the desired number, or press a Speed Dial key to dial a
programmed number.
End a call
Place the corded handset in the telephone base .
Share a call
During a call, parallel telephones (telephones on the same line) can join the call.
To join a call:
During a call, lift the corded handset to join.
Volume
Listening volume and ringer volume can be adjusted from the telephone base.
To adjust the listening volume:
During a call, press
+/- VOLUME to adjust the listening volume. The next call returns to the default listening volume.
To adjust the ringer volume:
At any time, slide the
RINGER VOL switch on the right side of the telephone base to adjust the ringer volume.
Call waiting
When you hear a call waiting tone during a call, press the switch hook rapidly to put your current call on hold and take the new
incoming call.
Press the switch hook rapidly at any time to switch bac
k and forth between calls.
Data port
You can connect your modem or fax machine to the telephone line through the DATA port.
1.
2.
Telephone operation