Ohaus VX SERIES FLOOR SCALES Indicator T32XW Manual en - Manual (Page 27)

EN-2 3000 Series Indicators
3.. Handshake
Set the flow control method.
NONE = no handshakng.
ON-OFF = XON/XOFF software handshakng.
3.. Auto Print
Set the automatc prntng functonalty.
OFF = dsabled.
ON.StAb = prntng occurs each tme the stablty crtera are met.
INtEr = prntng occurs at the defned nterval.
CONt = prntng occurs contnuosly.
When INtEr s selected, set the Prnt Interval.
1 to 3600 (seconds)
3.. Print Stable Data Only
Set the prnt crtera.
OFF = values are prnted mmedately.
ON = values are only prnted when the stablty crtera are met.
3.. Stop Bit
Set the number of stop bts.
1 = 1 stop bt.
2 = 2 stop bts.
3.. Content
Select the addtonal content of the prntout.
GROSS OFF = Gross weght s not prnted.
ON = Gross weght s prnted.
NET OFF = Net weght s not prnted.
ON = Net weght s prnted.
TARE OFF = Tare weght s not prnted.
ON = Tare weght s prnted.
UNIT OFF = Unt s not prnted.
ON = Unt weght s prnted.
3.. End Print
Advance to the next menu.