Ohaus VX SERIES FLOOR SCALES Indicator T32XW Manual en - Manual (Page 22)

EN-20 3000 Series Indicators
3.. Zero Range
Set the percentage of scale capacty that may be zeroed.
0% = zerong dsabled
2% = zero up to 2 percent of capacty
100% = zero up to full capacty
•
•
•
3.. Power On Unit
Set the unt that wll be actve at power on.
oz, lb, g, kg, lb:oz or
Auto (last unt n use when power was turned off.)
3.. End Setup
Advance to the next menu.
3. Readout Menu
Enter ths menu to customze dsplay functonalty.
Reset: No, Yes
Flter Level Lo, Med, H
Auto Zero Trackng Off, 0.d, 1d, 3d
Backlght Off, On, Auto
Auto Shut Off Off
End Readout Ext READOUT menu
3.. Reset
Set the Readout menu to factory default settngs.
No = not reset
Yes = reset
If the Legal for Trade menu tem s set to ON, the Stable Range, Averagng Level, Auto Zero Trackng and Auto
Off settngs are not reset.
3.. Graduation
Set the scale readablty.
0.001, 0.002, 0.005, 0.01, 0.02, 0.05, 0.1, 0.2, 0.5, 1, 2, 5, 10, 20.
NOTE: Not all settngs are avalable for each capacty. Refer to the Setup Table 3.3 for avalable settngs.