Ohaus Scout II Electronic Balances - Manual (Page 5)

5
9 VOLT BATTERY
BATTERY (NOT SUPPLIED)
AC ADAPTER
POWER INPUT JACK
BATTERY COMPARTMENT AND
HOOK STORAGE
RS232 JACK
(CERTAIN MODELS)
PAN
SUPPORT
(400g, 600g, 1200g, 6000g Balances Illustrated)
PAN
INSTALLATION
For best performance, the balance should be used in a clean, stable environment.
Do not use the balance in environments with excessive drafts, near magnetic
fields or equipment that generates magnetic fields, rapid temperature changes,
vibrations or corrosive vapors.
Power
Connect the AC Adapter at the rear of the balance. For portable operation, install
a 9 V battery in the battery compartment as shown in the illustration.
Pan Installation
Place the pan over the pan support as shown in the illustration.
Mode
Off
Zero
On
g
Scout
II