EVS IPDirector Version 6.0 - November 2012 Part 5 User's Manual - Manual (Page 58)

Transport Command Synchronization on Ganged Player
Channels
Trains
When live or stopped record trains are loaded on ganged player channels, the NEXT and
PREVIOUS commands executed on one PGM by means of the ShuttlePRO are only
applied on this PGM:
• If the train belongs to a group of ganged recorders, the application shifts to the next or
previous record train of the group.
• If the train does not belong to a group of ganged recorders, the application shifts to the
next or previous record train of the XNet network.
Clips
GO TO IN/OUT and SYNC ALL T/C:
When linked or non linked clips are loaded on ganged player channels, the GO TO IN, GO
TO OUT and the SYNCALL T/C are applied to all clips loaded on the ganged player
channels.
With the SYNCALL T/C command, all clips on ganged channels are loaded on the same
TC as the clip loaded on the main channel. The main channel is the channel where the
command is applied.
48 1. Control Panel
EVS Broadcast Equipment S.A. - November 2012 Issue 6.00.B