Remaining time / capacity field – EVS IPDirector Version 6.0 - November 2012 Part 5 User's Manual User Manual
Page 30

Play Mode
Description
Normal
Plays the loaded item forward from the IN point to the OUT point,
or from the current timecode.
This mode is available for all the types of loaded items.
Loop
Plays the loaded item in a continuous loop.
This mode is only available for clips and playlists.
Bounce
Plays the loaded item from the IN point to the OUT point, then from
OUT to IN and so on.
This mode is only available for clips.
This button is not displayed in the Software Player as only the normal Play mode is used.
You can press the
key to switch from one mode to another.
Remaining Time / Capacity Field
This field will have a different meaning and display color according to the activity being
performed on the channel.
When a clip is loaded
The following table shows the possible colors and meanings of the Remaining Time /
Capacity field when a clip is loaded.
The Remaining Time / Capacity field value and color depends on:
•
whether the clip is playing or paused
•
the media position indicator.
•
the defined (mark) IN and (mark) OUT points:
◦
When no new mark IN and mark OUT have been defined after the clip has been
loaded, the values displayed are based on the original IN and OUT points of the
clip.
◦
When a new mark IN and/or mark OUT have been defined after the clip has been
loaded, the values displayed will be based on this new mark IN and/or mark OUT
point(s).
Play/Pause Position Indicator
Timecode Value
Color
Pause
On or between IN
and OUT points
Count down to the OUT point
White
Pause
Before IN point
Count down to the IN point
White
Pause
After OUT point
Duration from the OUT point
Grey
20
1. Control Panel
EVS Broadcast Equipment S.A. - November 2012
Issue 6.00.B