Activating range alarm and system busy beep, Personalizing your phone – AASTRA 630d for Aastra 400 User Guide EN User Manual

Page 68

Personalizing your phone

eud-1292/1.0 – R1.0 – 01.2011

Activating range alarm and system busy beep

You want to set the system parameters with your cordless phone.

The

Range alarm

indicates that the connection between your phone and the system is

weak. You can set the phone so that you receive a warning signal if you leave the cov-
erage area

• You are making a call and are getting near the limit of the radio area: A warning sig-

nal sounds in the loudspeaker and the LED indicator is flashing red. If you leave the
radio area, the call is disconnected.

• The phone is in standby mode and you leave the radio area (only for phones on an

alarm system, see chapter

"Alarm"

, page

): The phone warns you by means of a

continuous ringing. After acknowledging this continuous ringing, it will be again
triggered after approx. one minute.

The

System busy beep

tells you that the system is overloaded – you need to wait until

the system is available again.

Press the navigation key to the right or the

Menu

softkey.

Settings

Scroll to

Settings

and press the

Select

softkey.

General

Scroll to

General

and press the

Select

softkey.

Select the setting you want and switch on or off with the

Select

softkey.