AASTRA 630d for Aastra 400 User Guide EN - Manual (Page 55)

Supplementary features
eud-1292/1.0 – R1.0 – 01.2011
55
Making a call on a third-party phone
You want to make a call on a third-party phone using your personal settings, for exam-
ple on a colleague’s phone or in a meeting room.
You can activate a third-party phone to make an internal or external call using your
personal settings, even if the phone is locked for external calls.
You can activate the phone for a business or private call.
Once you have activated the phone using a */# procedure and your PIN, dialling by
your private phone book is available.
The called party's display shows your personal phone number and not the number of
the phone from which you are making your call.
Any call charges incurred will be charged to you.
1. Enter procedure #36 for a business call.
2. Enter your internal phone number.
3. Enter your PIN.
4. Enter the internal or external phone number with the exchange access digit.
Press the Call key.
➔
The phone number displayed is dialled.
Note:
When you hang up, dialling by name and your private phone book remain
available for a whole minute so you can make another call.
Or:
1. Enter procedure #46 for a private call.
2. Enter your internal phone number.
3. Enter your PIN.
4. Enter the external call number directly, without the exchange access digit.
5. Press the Call key.
➔
The phone is now enabled; the external user is called.
Note:
The default PIN setting "0000" is not accepted. First change the PIN as
described in chapter
"Changing the User PIN" , page 78 or use */#
procedure *47 (see "User’s Guide */# Procedures" on the Aastra document
portal:
www.aastra.com/docfinder ). If you have forgotten your PIN, your system
administrator can reset it to the default setting.