AASTRA 6739i for Aastra 800 and OpenCom 100 User Guide EN - Manual (Page 43)

SIP Telephone Menus Aastra 6739i
41
The Options Menu
Some Aastra 6739i SIP telephone configuration settings are made via the Options
menu of the telephone. The Options menu offers the following sub-menus.
Audio: offers audio settings for the telephone, see page 41.
Display: offers display settings for the telephone, see page 42.
Bluetooth: offers settings for operating a Bluetooth headset, see page 43.
Status: contains telephone status information and error messages; a telephone re-
start or reset is also available in this sub-menu, see page 43.
Lock: offers locking the telephone against unauthorised usage, see page 43.
Note
Use the “Aastra 6739i SIP IP Phone User Guide” when you require information on the
wide variety of settings of the Options menu.
Audio
Press the options key and then the Audio softkey. The Audio menu card
appears.
Audio Mode: Telephone calls can be conducted using the handset, a headset or via
the loudspeaker. You can set the following combinations to do so.
Speaker: This is the default setting. Telephone calls are conducted using the
handset or the loudspeaker (hands-free operation, see page 21).
Headset: Select this setting if you wish to conduct calls via the handset and via
the headset. A call can be transferred from the handset to the headset
by pressing
. To transfer from the headset to the handset, pick up
the handset.
Speaker/Headset: Incoming calls are first taken via the loudspeaker when
the key is pressed. Use the key to switch from the loud-
speaker to the headset and vice versa during a call. You can continue the
call at anytime using the handset by picking up the handset.
Headset/Speaker: Incoming calls are first taken via the headset when
the key is pressed. Use the key to switch from the headset to