AASTRA 6739i for OpenCom 1000 User Guide EN - Manual (Page 32)

Configuring the Aastra 6739i
28
3. Enter the administrator password with the number keys (please refer to
Aastra 6739i Passwords on page 30). Confirm using the Enter softkey.
The Advanced menu card appears.
4. Press the Reset softkey.
The Reset menu card appears.
5. Press the Erase Local Cfg. softkey.
The Aastra 6739i starts and is quickly ready for operation once again.
Restoring Factory Settings
It is possible that you have been operating the Aastra 6739i with another commu-
nications system or with an Internet SIP provider. To operate the Aastra 6739i with
the OpenCom 1000 communications system, you should restore factory settings.
1. Establish an Ethernet connection to the Aastra 6739i by connecting it to the
OpenCom 1000 communications system. The Aastra 6739i requires a DHCP
address to execute the restart.
2. Wait until the Aastra 6739i has started. Now press the options key .
The Options list menu card appears.
3. Press the Advanced softkey.
The display shows Enter Administrator Password.
4. Enter the administrator password with the number keys (please refer to
Aastra 6739i Passwords on page 30). Confirm using the Enter softkey.
The Advanced menu card appears.
5. Press the Reset softkey.
The Reset menu card appears.
6. Press the Factory Default softkey.
The Aastra 6739i restarts and obtains its configuration from the
OpenCom 1000 communications system.