AASTRA 6739i for OpenCom 1000 User Guide EN - Manual (Page 28)

Configuring the Aastra 6739i
24
Programming on the Aastra 6739i
You can also directly assign functions to available softkeys on the Aastra 6739i.
Furthermore, you can change or delete function keys which were programmed on
the OpenCom 1000 Web Configurator. This programming is stored in the local
configuration of the Aastra 6739i.
Please note: When the local configuration of your Aastra 6739i is deleted
(please refer to page 27) all function keys programmed on
the device are deleted. The configuration restored is the one
configured on the Web Configurator of the OpenCom 1000
communications system.
1. Press the options key .
The Options list menu card appears.
2. Press the Softkeys softkey.
The display shows the overview of storage locations. Programmed function
keys are labelled; available storage locations are labelled Empty.
3. Press the softkey you wish to program.
Note: The Aastra 6739i user guide provides you with an overview of
programmable functions (in the “Options Key > Softkeys” chapter of the
manual).
4. Press the Type softkey to select the function you wish to program.
When you wish to delete a programmed function key select the Empty setting
and then press the
Save softkey to save the programming.
5. Enter the corresponding texts and parameters in the following menu card into
the Label and Value fields, e.g. a call number, on, or write over the existing
entries.
Activate a field by pressing on it. A softkey keyboard appears on the display:
– Use the Shift, Abc, Abc2, 123, &%* softkeys to make the desired character
appear on the keyboard.
– To correct a mistaken entry use the Bksp (backspace) softkey.
– Press the Hide softkey to hide the keyboard.
6. Press the Save softkey to save the programming.