1 normal answering, Press menu, select , and press select, Select answering, and press select – AASTRA DT390 for BusinessPhone User Guide EN User Manual
Page 87: Select answering key, and press select, Select any key and press select, Press back to save the setting, 2 automatic answer (headset mode), Select answer behaviour, and press select, 3 loudspeaking (handsfree mode), Select loudspeaking and press change to activate
C
ORDLESS
P
HONE
FOR
B
USINESS
P
HONE
87
1424-EN/LZT 103 091 Uen D 2010-02-12
15.6.1 Normal
Answering
The answering behavior is set to Hook-off by default. You can set it to
any key by doing the following:
1.
Press Menu, select
, and press Select.
2.
Select Answering, and press Select.
3.
Select Answering key, and press Select.
4.
Select Any key and press Select.
5.
Press Back to save the setting.
15.6.2
Automatic Answer (Headset Mode)
Note: The automatic answer mode is only relevant when a headset is
connected.
To set the phone to answer automatically, do the following:
1.
Press Menu, select
, and press Select.
2.
Select Answering, and press Select.
3.
Select Answer behaviour, and press Select.
4.
Select Automatically and press Change to activate the automatic
mode.
5.
Press Back to save the setting.
All incoming calls will be connected automatically when this
behavior is selected.
To remove the setting, press Change.
15.6.3
Loudspeaking (Handsfree Mode)
To set the phone to automatically answer with loudspeaker when you
press
, do the following:
1.
Press Menu, select
, and press Select.
2.
Select Answering, and press Select.
3.
Select Answer behaviour, and press Select.
4.
Select Loudspeaking and press Change to activate.
5.
Press Back to save the setting.