AASTRA DT390 for BusinessPhone User Guide EN - Manual (Page 72)

1424-EN/LZT 103 091 Uen D 2010-02-12 72
G ROUP F EATURES
16 hunt groups can be programmed, each containing 1 to 20 members.
A member can be either an extension number, an operator console or a
fictive number. Please ask your system administrator if you require this
function.
Note: The number of cordless extensions in a hunt group is limited to
eight (including tandem configurations).
Incoming calls to the hunt group are directed to free extensions in the
group. The hunt order within the group can be changed to suit your
needs. If all members of the hunt group are busy, an incoming call is
being queued. If no one answers this call before the programmed time,
the call is forwarded to the programmed diversion address (for example
operator).
Note: If all members in a hunt group are busy, the Callback or Intrusion
functions are not available.
13.3.1 Logging On To the Hunt Group
Before you can answer a group hunting call, you have to log on to one
or all hunt groups.
13.3.1.1 Logging On To One Hunt Group
To log on to one hunt group, do the following:
1. Press *28*.
2. Enter the hunt group code.
Ask the system administrator for the code.
3. Press # and .
Wait for verification tone.
4. Press to finish the procedure.
13.3.1.2 Logging On To All Hunt Groups
To log on to all hunt groups, do the following:
1. Press *28***.
2. Press # and .
Wait for verification tone.
3. Press to finish the procedure.