6 outgoing calls, 1 calling, Dial the number and press or call – AASTRA DT390 for BusinessPhone User Guide EN User Manual
Page 34: 6outgoing calls
1424-EN/LZT 103 091 Uen D 2010-02-12
34
O
UTGOING
C
ALLS
6
Outgoing Calls
This chapter describes how to make calls, how to conceal your number
from being displayed to the person you are calling, and how to redial the
last external number dialed.
6.1 Calling
To make a call, you can either select a contact in one of the phonebooks
available, or get the phone number or extension from the call list. You
can also use shortcuts, if available.
•
Available phonebooks are the local phonebook stored on the
phone and the company phonebook stored centrally on a server,
see Contacts on page 43.
•
The 25 last received phone numbers are stored in the call list along
with the latest dialed and missed phone numbers, see Call List on
page 41.
If the number you wish to dial is not stored in any phonebook, nor found
in the call list, you enter the desired phone number or extension with the
keypad.
To call a number that is not stored in the call list or among your contacts,
do the following:
1.
Dial the number and press
or Call.
The number is shown on the display while dialing.
2.
If needed, press Clear to erase and edit the number.
Use the navigation key to step and add or delete a digit in the
middle of a number.
Note: If you receive a queue tone when the digit(s) to get an external
line are dialed (if the feature Least Cost Routing is used in the
system), keep waiting. Once a line becomes free you will receive
a dial tone. If a warning tone is heard, the selected line is marked
Expensive.