Garmin GPSMAP 182C - Manual (Page 75)

GPSMAP 182/182C Owner’s Manual 69
M
AIN
M
ENU
> S
YSTM
T
AB
Sonar Tab
The Sonar tab contains setup options for the Sonar Page. The Sonar
Page is not active if you do not have an external Sonar Module
with transducer. Refer to the “Using Sonar” section on pages 78-91
for more information on sonar setup options.
Systm (System) Tab
The System tab controls system setting for beeper, speed filter,
languages, system mode, and simulator controls, restores factory
settings, displays the software version, and prepares software
update cards.
The following settings are available:
• Beeper—Off, Alarms Only, Key and Alarm: controls audible
beeps for keys and alarms.
• Speed Filter—Off, Auto, On: averages speed-readings.
• Language—displays the on-screen display languages.
• System Mode—sets Normal or Simulator Mode.
• Set Position*—sets your location while in Simulator Mode.
See page 3 for additional instructions.
• Track Control*—Auto Track, User Track: controls your
heading in Simulator Mode.
• Track*—sets your heading in Simulator Mode.
• Speed*—sets your speed in Simulator Mode.
• Transducer*—sets a transducer type.
* These fields are only available when the unit is in Simulator Mode.