beautypg.com

Garmin GPSMAP 182C User Manual

Page 101

background image

GPSMAP 182/182C Owner’s Manual

95

A

PPENDIX

>

M

OUNTING

THE

GPSMAP 182/182C U

NIT

To install the GPSMAP 182/182C unit:

1. Select the location of the mounting bracket.
2. Mark and drill the four mounting holes for the fastener you

are using.

3. Fasten the bracket to the surface using the appropriate

fastener.

4. Insert the GPSMAP 182/182C into the mounting bracket.

The bracket is designed for a tight fit to provide additional

support when swiveling the unit.

5. Screw the two mounting knobs through the bracket and into

the display case.

6. Connect the power/data and antenna cables (external

antenna only) to the back of the unit, making sure the

locking rings are fully tightened on both connectors.

The GPSMAP 182/182C with external antenna can be flush

mounted on a flat panel of .08-.52" thickness using the cam lobe

feature on its gimbal mounting bracket. When flush mounting

the GPSMAP 182/182C, be sure to choose an appropriately sized

location for the unit (see unit dimensions on page 93) and leave

1.25" (32 mm) clearance below the data card slot for inserting or

removing data cards.