Garmin GPSMAP 182C - Manual (Page 19)

GPSMAP 182/182C Owner’s Manual 13
B
ASIC
O
PERATION
> N
AVIGATING TO A
D
ESTINATION
To activate a Go To from a point list:
1. Press the NAV key. Highlight Go To Point, and press
ENTER.
2. From the Find menu, highlight Waypoints, and press
ENTER. (You can also choose to go to other points, such as
Cities or Tide Stations from this list.)
3. To select a waypoint from the waypoint lists, use the
ROCKER to highlight either the By Name or Nearest tab,
select a waypoint, and press ENTER.
Or
To select a waypoint from the map, highlight either the User
or Nearest tab and press MENU. With Select From Map
highlighted, press ENTER. Use the zoom IN and OUT keys
and the ROCKER to select a waypoint, then press ENTER.
Selecting a Go To Graphically
A graphical Go To can be used to select one of three items from
the map display: an existing waypoint, on-screen map items such
as roads, rivers, cities, and navaids, or a new map point. If you
are selecting a map item as the Go To destination, the GPSMAP
182/182C automatically uses the name of the map item, but the
point is not stored in the waypoint list. See page 21 for creating
waypoints using map items. If you are selecting a new map point
(non-map item) as the Go To destination, the GPSMAP 182/182C
automatically creates a waypoint at the pointer location.
To activate an existing waypoint or map item as a Go
To from the map display:
1. Use the ROCKER to highlight the waypoint or map item
on-screen, and press NAV.
2. Highlight Go To , then press ENTER.
Or
1. Highlight the waypoint or map item, press ENTER.
2. Highlight Go To from options at the bottom of the window,
and press ENTER.