Garmin GPSMAP 182C User Manual
Page 63
GPSMAP 182/182C Owner’s Manual
57
M
AIN
M
ENU
>
R
OUTES
T
AB
To add turns at the beginning or end of the route:
1. Select the first (to add waypoints to the beginning of the
route) or last (to add waypoints to the end of the route)
route waypoint with the map pointer, and press
MENU.
2. Highlight the
Add option and press ENTER.
3. Move the pointer to the new point or location, and press
ENTER.
4. If you are not inserting an existing waypoint, press
ENTER
to confirm the new waypoint.
5. Repeat steps 3 and 4 to insert additional waypoints, or
press
QUIT to finish.
The GPSMAP 182/182C’s route edit mode also allows you to insert
a new route waypoint in any route leg using the map pointer.
To insert a new waypoint between two existing route
waypoints:
1. Use the
ROCKER to select the leg you want to insert the
new waypoint in (the route line is now highlighted and a
dotted line appears when the leg is selected), and press
ENTER.
2. Move the pointer to the new map location, existing
waypoint, or map item (
ADD is displayed below the arrow
and the route lines move with the arrow), and press
ENTER.
3. If you are not inserting an existing point, press
ENTER to
confirm the new waypoint.
Add Before—inserts a waypoint into the list of route points or add
a point(s) onto the end of the route.
To insert a point into the route, or add a point to
the end:
1. From either the Route Review or Active Route Pages, use
the
ROCKER to highlight the point you want to insert the
new point before (to add a point to the end, highlight the
blank field at the bottom of the list), and press
MENU.
2. Highlight
Add Before, and press ENTER.
3. From the
Find menu, highlight Waypoints, and press
ENTER. (You can also choose from other points, such as
Cities or Tide Stations from this list.) From either the
User
or
Nearest From Current Location tab lists, choose the
waypoint you want and press
ENTER twice. (See page 50
for searching for waypoints by name.)
Or
To select a waypoint from the map, highlight the
User or
Nearest tab, and press MENU. With Select From Map
highlighted, press
ENTER. Use the zoom IN and OUT keys
and the
ROCKER to highlight a waypoint on the map, and
press
ENTER.