Garmin GPSMAP 182C - Manual (Page 59)

GPSMAP 182/182C Owner’s Manual 53
M
AIN
M
ENU
> R
OUTES
T
AB
To turn on or off proximity alarms:
1. Use the ROCKER to highlight the field below Proximity
Alarm, and press ENTER.
2. Select the ON or OFF setting, and press ENTER.
To display the waypoint menu options:
Using the ROCKER, highlight the Proximity tab, and press
MENU.
To clear one or all proximity waypoint(s) from the list:
1. Use the ROCKER to highlight the proximity waypoint, and
press MENU.
2. To clear a single alarm, highlight Delete Alarm, and press
ENTER.
3. To clear all proximity waypoints, select the Delete All
option, and press ENTER.
4. Use the ROCKER to highlight OK, and press ENTER.
The following options are available from the Proximity sub tab of
the Points tab:
• Delete Alarm—removes selected waypoint from proximity
list.
• Delete All—removes all waypoints from proximity list.
Routes Tab
The Route List Page displays all the routes currently stored in
memory, along with a descriptive name for each route. When a
route has been created, it can be activated and used for navigation
with the NAV key. A route can be followed in the same sequence as
it was originally created, or you can invert the route and navigate
from the end waypoint back to the beginning waypoint. From
the Route list menu, you can choose New Route (page 17), Copy
Route, Delete Route, or Delete All.
To start a route with the NAV key:
1. From any page, press NAV, using the ROCKER, highlight
Follow Route, and press ENTER. If you highlight a route
from the Route List or Route Review Page, and press
NAV. The window automatically shows Follow
name>.
2. Highlight the route you want to navigate, and press ENTER.
3. Choose Activate or Invert and Activate, and press
ENTER. Activate uses the route as is. Invert and Activate
reverses and starts the route.