Update sub tab – Garmin GPSMAP 2210 User Manual
Page 71
GPSMAP 2206/2210 Owner’s Manual
6
M
AIn
M
enu
>
s
ysteM
t
Ab
Use the Advanced NMEA Setup Page to turn the GPS status (GSA, GSV),
Waypoint/Route (WPL, RTE), and the Garmin proprietary sentences on or off.
Check any other equipment’s owners manual to see what sentences are required
to be enabled for functionality.
lat/lon Minutes Precision allows you to adjust the number of digits to the right
of the decimal point for transmission of NMEA Output, either 2, 3, or 4 digits.
Use the Waypoint ID setting to output the waypoint identifiers as names or
numbers.
Advanced NMEA Setup Page
To change the advanced NMEA settings:
1. Press the
NMEA Setup soft key to open the Advanced NMEA Setup
Page.
2. To change, enable, or disable NMEA output sentences, highlight the
sentence, and press
ENTER to select or clear the check box. Only
selected sentences are output.
Update Sub Tab
The Update sub tab shows the status of any software you are uploading to your
unit.
• Update—updates software on your unit.
• Prepare Card—updates software for devices connected to your
GPSMAP 2206/2210. When selected, information about your network
installation is collected and saved to a data card. Use the data card with
Marine Updater on your personal computer to download software updates
for your system. Using Marine Updater, you can put all of the software
updates on a data card. When you put the data card into the unit, it updates
the software for all devices on the network. Check the Garmin Web site