Using waypoint lists, User waypoints – Garmin GPSMAP 2210 User Manual

Page 25

GPSMAP 2206/2210 Owner’s Manual

AsIc

PerAtIon

evIewIng

And

dItIng

AyPoInts

Using Waypoint Lists

The Points tab on the Main Menu has two sub tabs, User and Proximity, which

allows you to manage a large number of waypoints quickly and efficiently. The

Proximity sub tab also provides a continuously updated proximity waypoint alarm

that you can use to define an alarm circle around submerged hazards or shallow

waters.

To access the Points tab from the Main Menu:

1. Press and hold

ADJ/MENU to open the Main Menu.

2. Use the

ROCKER to highlight the Points tab, and highlight either the User

Proximity sub tab.

Sub tabs

User Waypoints

The User sub tab on the Points tab shows a master list of all waypoints currently

stored in memory. From the User sub tab, you can review, edit, rename, or delete

individual waypoints, or delete all user waypoints. The number of available and

used waypoints are shown at the bottom of the User sub tab. Stored waypoints are

arranged in alphanumeric order.

To scroll through and review the waypoint list:

1. Use the

ROCKER to highlight the Points tab on the Main Menu, and then

highlight the

User sub tab.

2. Press up or down on the

ROCKER to scroll through the list of waypoints;

press right or left on the

ROCKER to scroll by page.

3. Press

ENTER to review the highlighted waypoint on the Review Waypoint

Page. See page

for information on reviewing and editing waypoints.

4. Press the

Next soft key to return to the waypoint list. The next waypoint in

the list is automatically highlighted.

Deleting Waypoints

The following soft keys are available when you highlight a waypoint on the User

sub tab:

•

New Waypoint—creates a new waypoint.

• Delete—deletes the selected waypoint from the list and from any route in

which the waypoint was used.

• Del by Smbl—deletes waypoints that use the same symbol.
• Delete All—deletes all waypoints from the unit.

NOTE: When you delete a waypoint from the list, it cannot be recovered from

the unit. Save important waypoints to a data card, or write them down.