beautypg.com

Tracback tips – Garmin GPSMAP 2210 User Manual

Page 30

background image

22

GPSMAP 2206/2210 Owner’s Manual

b

AsIc

o

PerAtIon

>

n

AvIgAtIng

to

A

d

estInAtIon

5. To change the name of the saved track, highlight the

Name field and press

ENTER, make any changes, and press ENTER again.

6. To specify the color used to show the saved track line on the map and

highway, highlight the

Color field and press ENTER, choose a color, and

press

ENTER again.

7. To show the track on the Map and Highway Pages, highlight the check box

to the left of

Show on map and highway, and press ENTER.

8. Press the

OK soft key to save the track log.

To review and edit a track:

1. On the

Saved sub tab, highlight a track and press ENTER to open the

Saved Track Page.

2. Make any changes, and then press

QUIT.

Initiating a Follow Track

You must save a track before using the Follow Track option. If there are no saved

tracks, the message “There are no Saved Tracks to follow” appears.

To follow a track using the NAV key:

1. Press

NAV, highlight Follow Track, and press ENTER. The Select Track

Page appears.

2. Highlight the track you want to follow, and press

ENTER.

3. To invert the Follow Track (navigate it in the reverse direction), press

NAV,

highlight

Invert Route, and press ENTER.

To start a TracBack using the NAV key:

1. Press

NAV to open the Navigation menu.

2. Highlight

TracBack, and press ENTER. The TracBack Through window

appears.

3. Highlight the time, date, or

Entire Log, and press ENTER.

To stop TracBack navigation:

1. Press

NAV.

2. Highlight

Stop Navigation, and press ENTER.

TracBack Tips

When a TracBack is active, the GPSMAP 2206/2210 takes the track log stored

in memory and divides it into segments called legs. Up to 300 temporary turns

(BEGIN, TURN 1, TURN 2,...., TURN X, END) are created to mark the most

significant features of the track log to duplicate your exact path as closely as

possible. To get the most out of the TracBack feature, remember the following

tips:

• Always clear the track log at the starting point.
• The Record Mode option on the track log setup page must be set to

Fill or

Wrap.

• At least two track log points must be stored in memory to create a

TracBack route.

• If the track log Interval field is set to Time, the route may not follow your

exact path (keep the interval set to Resolution for best performance).

• If the receiver is turned off or satellite coverage is lost during your trip,

TracBack draws a straight line between any point where coverage was lost

and where it resumed.

• If your track log’s changes in distance and direction are too complex,

300 waypoints might not mark your path accurately. The receiver then

assigns the 300 waypoints to the most significant points of your track, and

simplifies segments with fewer changes in direction.