beautypg.com

Garmin GPSMAP 238 Sounder User Manual

Page 91

background image

81

Main Menu: DSC Tab

Reference

There are two ways to add a new entry into the directory.

To add a new Directory entry:

1. Press Menu, then highlight ‘New Item’ and press ENTER/MARK.

2. Or, with the Directory Tab highlighted press the Arrow Keypad DOWN, highlight an empty fi eld and

press ENTER/MARK to access the New Directory Item window.

The New Directory Item window allows you to input information of a known contact.

To add the MMSI number, Name, or Comment:

1. Press UP/DOWN on the Arrow Keypad to highlight the MMSI, Name, or Comment fi eld.

2. Press ENTER/MARK to highlight the fi rst digit on that fi eld.

3. Press UP/DOWN on the Arrow Keypad to enter the numbers/letters.

4. Press LEFT/RIGHT on the Arrow Keypad to move to the next position.

5. Press ENTER/MARK to accept the entry.

6. Press UP/DOWN on the Arrow Keypad, highlight the ‘Delete’ button and press ENTER/MARK to

delete the entry, or highlight the ‘OK’ button and press ENTER/MARK to accept the entry.

After creating a New Directory Item entry, the name created is attached to that particular MMSI

number. If you return to the Log, the new name is displayed under the corresponding MMSI number.
Another way to input a name is from the Entry Review page or the DSC Distress Call or DSC Posi-
tion Report pages. The Name fi eld is only available in the GPS. Names cannot be sent like the MMSI
numbers to other DSC users.

DSC Setup

Garmin chartplotters have the ability to turn DSC ‘On’ or ‘Off’. This option is benefi cial for users

who have more than one GPS chartplotter. If you want only DSC to display on a particular chartplotter,
turn DSC off on the remaining Garmin chartplotters that support DSC.

Adding a Directory
Entry

DSC Setup

“Simulate..” options only
appear while in Simulator
mode..

188188C238 Manual Part 2.indd 81

6/30/2003, 3:32:28 PM