ACU-RITE Micro-Line T - Manual (Page 6)

MICRO-LINE Reference Manual
INSTALLATION
Installing the Readout
Follow the readout installation instructions that are included with your
mounting arm bracket kit. The electrical specifications for the readout
are listed on pg. 27.
After the installation is complete, proceed to “Power Up.”
Installing the Scales
Install the linear encoders according to installation instructions found
within your Micro-Line system manual. These general installation
instructions are found on page 33. Read these instructions completely
even though bracket kit instructions supersede them.
3
MLTmanual.QXD 2/12/02 4:10 PM Page 10