ACU-RITE Micro-Line T - Manual (Page 33)

MICRO-LINE Reference Manual
REFERENCE
30
±
Changes the sign of the entered value from
positive (+) to negative (-) or vice versa.
Numbers are positive unless a (-) appears in
front of them.
TOOL DEF
TOOL USE
CLEAR
Used to establish tool offset.
To establish which tool offset will be used.
Acts as backspace key during numeric
entry; otherwise, it clears or cancels the last
operation.
ENTER
Completes numeric operations; selects next
parameter in SETUP.
. Decimal point can be used during numeric
entry; also used to access the recall feature
for international units with 5µm (0.0002”)
scales after power up.
0-9
Used to enter a distance.
MLTmanual.QXD 2/12/02 4:10 PM Page 25