Reference, Mounting preparation – ACU-RITE Micro-Line T User Manual
Page 38

MICRO-LINE
Reference Manual
35
REFERENCE
•
Understand your mounting requirements.
•
Mount with lipseals down and away from the work area.
•
Brackets should be short and rigid.
•
Surfaces must be in good condition, clean and free of dirt
and paint.
•
Ensure the correct length scale is being used for the total
machine travel.
Do not remove alignment brackets until instructed.
Never mount with lip seals upward or toward work area.
Mounting Preparation
Limit equipment travel to scale measuring length or less.
MLTmanual.QXD 2/12/02 4:10 PM Page 16
This manual is related to the following products: